Difference between revisions of "SIM231:Firmware"

From Serious Documentation
Jump to: navigation, search
(→‎Latest Firmware)
Line 10: Line 10:
 
If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.
 
If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.
  
−
== Latest Firmware ==
+
== Factory Reset ==
 
During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the [[TugInstall]] package.  See [[TugInstall]] for details.
 
During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the [[TugInstall]] package.  See [[TugInstall]] for details.

Revision as of 09:50, 17 May 2016

Please report issues in the SIM231 SHIP Forum on mySerious.com.

Support for SHIP Version 4 is not planned for SIM231. There are 3 separate firmware elements in SHIP Version 5:

  • SHIPPaddle - the early stage boot loader (very small, responsible for loading SHIPTug)
  • SHIPTug - the full boot loader (often held in serial flash)
  • SHIPEngine - the main GUI management engine

You can also do a full factory reset using the TugInstall firmware.

If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.

Factory Reset

During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the TugInstall package. See TugInstall for details.

Retrieved from "https://techref.myserious.com/index.php?title=SIM231:Firmware&oldid=5310"