Difference between revisions of "SIM115:Firmware"

From Serious Documentation
Jump to: navigation, search
Line 1: Line 1:
 
Please report issues in the SIM115 SHIP Forum on mySerious.com.  
 
Please report issues in the SIM115 SHIP Forum on mySerious.com.  
  
Support for SHIP Version 4 is not planned for SIM115.
+
Support for SHIP Version 4 is not planned for SIM115. There are 3 separate firmware elements in SHIP Version 5:
 
 
There are 3 separate firmware elements in SHIP Version 5:
 
 
* [[SHIPPaddle]] - the early stage boot loader (very small, responsible for loading SHIPTug)
 
* [[SHIPPaddle]] - the early stage boot loader (very small, responsible for loading SHIPTug)
 
* [[SHIPTug]] - the full boot loader (often held in serial flash)
 
* [[SHIPTug]] - the full boot loader (often held in serial flash)

Revision as of 08:13, 13 August 2014

Please report issues in the SIM115 SHIP Forum on mySerious.com.

Support for SHIP Version 4 is not planned for SIM115. There are 3 separate firmware elements in SHIP Version 5:

  • SHIPPaddle - the early stage boot loader (very small, responsible for loading SHIPTug)
  • SHIPTug - the full boot loader (often held in serial flash)
  • SHIPEngine - the main GUI management engine

You can also do a full factory reset using the TugInstall firmware.

If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.

Latest Firmware

During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the TugInstall package. See TugInstall for details.

v5.0.120 will be posted here August 13th, 2014. Contact Serious for details.