Difference between revisions of "SIM115:Firmware"

From Serious Documentation
Jump to: navigation, search
Line 2: Line 2:
  
 
Support for SHIP Version 4 is not planned for SIM115.
 
Support for SHIP Version 4 is not planned for SIM115.
−
 
−
== v5.0 ==
 
  
 
During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the [[TugInstall]] package.  See [[TugInstall]] for details.
 
During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the [[TugInstall]] package.  See [[TugInstall]] for details.
Line 14: Line 12:
 
If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.
 
If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.
  
−
== v5.0.120 ==
+
== Latest Firmware ==
 +
v5.0.120 will be posted here August 13th, 2014.  Contact Serious for details.

Revision as of 08:12, 13 August 2014

Please report issues in the SIM115 SHIP Forum on mySerious.com.

Support for SHIP Version 4 is not planned for SIM115.

During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the TugInstall package. See TugInstall for details.

There are 3 separate firmware elements in SHIP Version 5:

  • SHIPPaddle - the early stage boot loader (very small, responsible for loading SHIPTug)
  • SHIPTug - the full boot loader (often held in serial flash)
  • SHIPEngine - the main GUI management engine

If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.

Latest Firmware

v5.0.120 will be posted here August 13th, 2014. Contact Serious for details.

Retrieved from "https://techref.myserious.com/index.php?title=SIM115:Firmware&oldid=4385"