Difference between revisions of "SIM115:Firmware"

From Serious Documentation
Jump to: navigation, search
m (TerryW-Serious moved page SIM115:SHIPEngine to SIM115:Firmware: more generic)
(v5.0)
Line 3: Line 3:
 
== v5.0 ==
 
== v5.0 ==
  
During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the [[TugInstall]] package which is uploaded into the SIM as if it were SHIPEngine but causes:
+
During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the [[TugInstall]] package.  See [[TugInstall]] for details.
* a full factory reset of the SIM's non-volatile memory
 
* a re-install of Paddle
 
* a re-install of Tug
 
After [[TugInstall]], you will need to individually download SHIPEngine to the SIM.
 
  
 
There are 3 separate firmware elements in SHIP Version 5:
 
There are 3 separate firmware elements in SHIP Version 5:
Line 16: Line 12:
 
If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.
 
If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.
  
v5.0.120  
+
== v5.0.120 ==
  
 
== v4 ==
 
== v4 ==
 
SIM115 is not supported by SHIP Version 4
 
SIM115 is not supported by SHIP Version 4

Revision as of 08:11, 13 August 2014

Please report issues in the SIM115 SHIP Forum on mySerious.com.

v5.0

During the beta process, it is recommended you do a full "Factory Reset" of your SIM using the TugInstall package. See TugInstall for details.

There are 3 separate firmware elements in SHIP Version 5:

  • SHIPPaddle - the early stage boot loader (very small, responsible for loading SHIPTug)
  • SHIPTug - the full boot loader (often held in serial flash)
  • SHIPEngine - the main GUI management engine

If your SIM has SHIPEngine 5.0.107 or later, any or all of these elements can be upgraded in your SIM through SHIPTide or over-the-wire (SPI, UART, USB) from your connected embedded system.

v5.0.120

v4

SIM115 is not supported by SHIP Version 4