Difference between revisions of "SHIP:Node:linkset"

Revision as of 15:04, 25 November 2012

Within a given link, there may be one or more linkset nodes. Each linkset encompasses all the traffic between two endpoints in a link.

For slave link types of master/slave protocols (for example the MODBUS_SLAVE_RTU), the link may be representing one or more Modbus slaves within the SHIPEngine environment. Even though the protocol is running on a single physical communications channel (e.g. UART0), each linkset within the link can act as one of a number of independent virtual slaves.

For master link types of of master/slave protocols (for example MODBUS_MASTER_ASCII) you may want to address multiple slaves on the channel. Each slave would be identified by a linkset with the slave ID set appropriately.

Parent Nodes

The following nodes are permitted to hold this node:

• link

Child Nodes

The following nodes are permitted to exist within this node:

• linkvar
• const

Properties

Examples

Adding two linksets to the example in link reference:

In this example, our GUI is acting as a Modbus Slave attached to UART0, potentially one of many on the communications channel. This physical channel could be, for instance, a multi-drop RS485 network with many slaves of which our SIM is only one. Our GUI, because it has the two linksets at ID #1 and #13 created, will respond as if it were two of those slaves on the network.