Difference between revisions of "AN1008 - Get Started Using SHIPCrane"

Revision as of 16:27, 11 October 2017

Starting SHIPCrane

Once you double click on the app and it comes up, you will see something like the following image. When SHIPCrane comes up, there is no data loaded.

Connecting Your Devices to the USB Ports

After you have connected your devices to the USB ports, you will see them appear under the "Connected Modules" tab.

Importing a Firmware Bundle (Optional)

If you plan to update the firmware of your devices, choose the bundle to update with.

Import Button

Click on the "Import" button at the bottom left of the app.

You will see the "Import Container" popup screen show.

Bundle Selection

Select the "Bundles" tab to see available versions depending on the selection of the "Active", "Retired", and "Experimental" check boxes.

After choosing the desired bundle, click the "Import" button.

When complete, you will see all three firmware types imported and loaded with their "Type" shown, Bootstrapper for Paddle, Installer for Tug, and Application for Engine.

Unlock Container

Click on the "Unlock Container" link in order to edit selections.

Mode Select

Ensure the "Mode" drop down for Paddle, Tug, and Engine is "Bootloader".

After Select

Bootstrapper

Change the "After" drop down for the Bootstrapper Type to "Nothing".

Installing

Change the "After" drop down for the Installing Type to "Restart".

Application

Change the "After" drop down for the Application Type to "Nothing".

Importing Your Cargo (Optional)

If you are updating an GUI image you can incorporate it in with the other updates.

Choose File

In the area below "3", click on the "…" button to bring up the "Choose File or Container" popup in order to choose a cargo file.

Confirm

Click the "Confirm" button when done.

A new "Type" of Cargo will be added.

Set Mode

Ensure the "Mode" drop down is set to Bootloader.

Set After

Change the "After" drop down to Launch.

Program

Click the "Program" button to begin programming all connected devices. You will see SHIPCrane update the status of all devices until complete.

Done

Devices will show as "Done" when complete.